INSTAR Deutschland GmbHINSTAR Deutschland GmbH

1080p CGI Commands

  1. Developer
  2. /
  3. 1080p Series CGIs
  4. /
  5. Features Menu
  6. /
  7. IR Nightvision



The Features Menu :: IR Nightvision



param.cgi?cmd=getinfrared

Function Get IR LED Parameter
Authority admin
Parameter infraredstat: IR LED Status - auto (controlled by light sensor), close (deactivated)
Example GET: http://admin:instar@192.168.178.88/param.cgi?cmd=getinfrared
GET: http://192.168.178.88/param.cgi?cmd=getinfrared&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.178.88/param.cgi?cmd=setinfrared&-infraredstat=auto



param.cgi?cmd=getinstaradmin&-index=2

Function Get Day / Night Mode Parameter
Authority admin
Parameter infraredstat: Day/Night Mode - auto (controlled by light sensor), open (always day / colour mode), close (always night / black&white mode)
Example GET: http://admin:instar@192.168.178.88/param.cgi?cmd=get_instar_admin&-index=2
GET: http://192.168.178.88/param.cgi?cmd=get_instar_admin&-index=2&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.178.88/param.cgi?cmd=set_instar_admin&-index=2&-value=auto

This setting only affects the button displayed inside the WebUI menu. To switch your camera into a permanent night or day mode you have to adjust the thresholds for this switching behaviour. This can be done with the following commands:

For all camera models - except IN-9020 FHD and IN-9010 FHD:

param.cgi?cmd=set_instar_admin&-index=2&-value=close&cmd=setircutattr&-saradc_switch_value=1&-saradc_b2c_switch_value=1

param.cgi?cmd=set_instar_admin&-index=2&-value=open&cmd=setircutattr&-saradc_switch_value=270&-saradc_b2c_switch_value=270

param.cgi?cmd=set_instar_admin&-index=2&-value=auto&cmd=setircutattr&-saradc_switch_value=208&-saradc_b2c_switch_value=190

ONLY for the camera models IN-9020 FHD and IN-9010 FHD:

param.cgi?cmd=set_instar_admin&-index=2&-value=close&cmd=setircutattr&-saradc_switch_value=1&-saradc_b2c_switch_value=1

param.cgi?cmd=set_instar_admin&-index=2&-value=open&cmd=setircutattr&-saradc_switch_value=270&-saradc_b2c_switch_value=270

param.cgi?cmd=set_instar_admin&-index=2&-value=auto&cmd=setircutattr&-saradc_switch_value=60&-saradc_b2c_switch_value=40



param.cgi?cmd=getplancgi

Function Define a Time Window to Switch IR LEDs from off to auto
Authority admin
Parameter plancgi_enable_[0, 1]: De/Activate Switch Event at Time - [0 - 86399] in seconds = 0:00:00 - 23:59:59 o´clock
Example GET: http://admin:instar@192.168.178.88/param.cgi?cmd=getplancgi
GET: http://192.168.178.88/param.cgi?cmd=getplancgi&-usr=admin&-pwd=instar
SET: http://admin:instar@192.168.178.88/param.cgi?cmd=setplancgi&-plancgi_enable_0=1&-plancgi_enable_1=1&-plancgi_time_0=21600&-plancgi_time_1=64800