1080p CGI Commands

Function	Get your Camera´s INSTAR DDNS Configuration
Authority	admin
Parameter	`our_enable`: 1: INSTAR DDNS enabled, 0: INSTAR DDNS disabled
	`our_server`: INSTAR DDNS Server Domain
	`our_port`: INSTAR DDNS Server Port
	`our_uname`: Your INSTAR DDNS ID
	`our_passwd`: Your INSTAR DDNS Password
	`our_domain`: Your INSTAR DDNS Address
	`our_interval`: Update Intervall
Example	GET: `http://admin:instar@192.168.178.88/param.cgi?cmd=getourddnsattr`
	GET: `http://192.168.178.88/param.cgi?cmd=getourddnsattr&-usr=admin&-pwd=instar`

Function	Get your Camera´s 3rd Party DDNS Configuration
Authority	admin
Parameter	`d3th_enable`: 1: 3rd Party DDNS activated / INSTAR DDNS disabled, 0: 3rd Party DDNS deactivated / INSTAR DDNS enabled
	`d3th_service`: 0: DynDNS, 1: NoIP
	`d3th_uname`: Your Username
	`d3th_passwd`: Your Password
	`d3th_domain`: Your 3rd Party DDNS Address
Example	GET: `http://admin:instar@192.168.178.88/param.cgi?cmd=get3thddnsattr`
	GET: `http://192.168.178.88/param.cgi?cmd=get3thddnsattr&-usr=admin&-pwd=instar`
	SET: `http://admin:instar@192.168.178.88/param.cgi?cmd=set3thddnsattr&-d3th_enable=1&-d3th_service=0&-d3th_uname=myUsername&-d3th_passwd=myPassword&-d3th_domain=myDomain.dyndns.com`

Function	Get your Camera Server Variables
Authority	admin
Parameter	`model`: Camera Model Identifier
	`hardVersion`: Hardware Version
	`softVersion`: Firmware Version
	`webVersion`: WebUI Version
	`startdate`: Camera Uptime
	`upnpstatus`: UPnP service ok, off, failed
	`facddnsstatus`: INSTAR DDNS Status ok, off, failed
	`th3ddnsstatus`: INSTAR 3rd Party DDNS Status ok, off, failed
	`platformstatus`: Platform Status 0, 1
	`sdstatus`: SD Card Status out, Ready, Read only
	`sdfreespace`: SD free space，KB
	`sdtotalspace`: SD total space，KB
Example	GET: `http://admin:instar@192.168.178.88/param.cgi?cmd=getserverinfo`
	GET: `http://192.168.178.88/param.cgi?cmd=getserverinfo&-usr=admin&-pwd=instar`

The Network Menu :: Remote Access